Archive for the ‘Microsoft’ Category


> Click on “Start Menu” and type ‘run’ in the Start search bar.


>When the Run search bar opens, type in ‘regedit.exe’ and click “Ok”.  When the “User Account Control”box opens then click “Yes”

> Go to and ‘left click’ on each white arrow just to the left of each little manila folder named as follows: (you may have to scroll down to find a couple of these)




Local Settings’





(Just left-click this one on the folder itself) ‘TrayNotify’ (find & locate ‘IconStreams’ & ‘PastIconsStream’

> Press and hold down your left keyboard ‘Ctrl’ key.  While holding down the ‘Ctrl’ key use your mouse to left-click, one time each, on ‘IconStreams’ & ‘PastIconsStream’.  Now, right-click and select ‘Delete’regarding the highlighted items.


>This will open a “Confirm Value Delete” dialogue box.  It will say, “Deleting certain values could cause system instability.  Are you sure you want to permanently delete these values?”  (<Do not worry>, you will be fixing this in the next step) Now click ‘Yes’

> Start your “Task Manager” by pressing ‘Ctrl’+’Shift’+’Esc’ and select the “Processes” tab and find ‘explorer.exe’


>Right click on ‘explorer.exe’ and select” End Process”


> A “Windows Task Manager” box will open and ask, “Do you want to end ‘explorer.exe’?”, “If an open program is associated with this process, it will close and you will lose any unsaved data.  If you end a system process, it might result in an unstable system.  Are you sure you want to continue?” (<Do not worry> you will be fixing this in the next step) Now click ‘Yes’

> Now select the ‘Applications’ tab in “Task Manager”, in the bottom right hand corner, select ‘New task…’and type ‘explorer.exe’ then click “Ok”

> Explorer will now reboot and your icons should return.  *Note: You may need to reset your preferences for each icon by going back to your “Notification Area Properties” because it will reset most of them to the default status”

To work around this issue, delete any cached passwords for your account and any modern authentication tokens from the Keychain. To do this, follow these steps.

  1. Exit Outlook and all other Office applications.
  2. Open Keychain Access by using one of the following methods:
    • With Finder as the selected application, click Utilities on the Go menu. Double-click Keychain Access.
    • In Spotlight Search, type Keychain Access and then double-click Keychain Access in the search results.
  3. In in the search field in Keychain Access, enter Exchange.
  4. In the search results, select each item to view the Account that’s listed at the top, and then press the Delete key. Repeat this step to delete all the items for your Exchange account.
  5. In the search field, enter adal.
  6. Select all items whose type is MicrosoftOffice15_2_Data:ADAL:<GUID>, and then press the Delete key.
  7. In the search field, enter office.
  8. Select the items that are named Microsoft Office Identities Cache 2 and Microsoft Office Identities Settings 2, and then press the Delete key.
  9. Quit Keychain Access.

You may notice that meetings with a ‘Room’ mailbox will by default only show a “Busy” status.
Many, including the organisation I work for, wish to have (at the very minimum) the following displayed in the Room’s calendar:

  • Organiser of the meeting, and
  • The subject of the meeting

Below I will demonstrate how to set the permissions so that all meetings (except those explicitly marked as ‘Private’) publicise the above details to all who view its calendar.

  1. First make sure you have the remote signed execution policy set to true. You can do this by running PowerShell in admin mode and running: Set-ExecutionPolicy RemoteSigned
  2. Next, run the following to authenticate your self and import PowerShell commands to your local session:
    $LiveCred = Get-Credential
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange-ConnectionUri -Credential $LiveCred -Authentication Basic -AllowRedirection
    Import-PSSession $Session

Set the Room calendar to show ‘limited details’ by default

We will do this using the Set-MailboxFolderPermission command. Click the link to see the full list of parameters you can pass in to the command. We will be using ‘limited details’ for the AccessRights variable.

Set-MailboxFolderPermission -AccessRights LimitedDetails -Identity Room:\calendar -User default

Set the Room calendar to show the ‘Organiser’ and ‘Subject’ of the meeting

We will do this using the Set-CalendarProcessing command. Click the link to see the full list of parameters you can pass in to the command.
Set-CalendarProcessing -Identity testroom -AddOrganizerToSubject $true -DeleteComments $false -DeleteSubject $false



Hvis din Office installation skal have ændret sprog. Download pakken herunde.

Ex. hvis Engelsk version er installeret fra en Office 365, og du vil have den ændret til dansk.

“Language Accesory Pack” hentes:

Auto-complete in Outlook 2010 missing after migration to Office 365

Step One: Close Outlook

Step Two: Browse to the RoamCache where the auto-complete file is stored. (location is C:\Users\%username%\AppData\Local\Microsoft\Outlook\RoamCache

Step Three: Rename RoamCache to old_RoamCache

Step Four: Open Outlook, and create a new email and put a valid email address in the to. .field. Close the new email (you don’t need to save ). Close Outlook

Step Five:  Step four creates a new Stream_Autocomplete_long GUID….xx.dat file in a new RoamCache folder.

Step Six: Change the extension of the file in Step 5 from .dat to .dat22

Step Seven: Copy the original Stream_Autocomplete…from old_RoamCache & paste into theRoamCache folder

Step Eight: Copy the GUID string from the .dat22 and replace the GUID of your previous Stream_AutoComplete

Step Nine: Open Outlook, all of your previous auto-complete entries are now available.

Når opdateringspakke (update rollup) 1,2 eller 3 er installeret på Exchange 2010 Server og du mødes af blank OWA side ved at browse til OWA-indgangsiden (ex. er denne løsning en der har virket for os – op til flere gange.

Du mødes af en URL ala denne:

Scriptet updatecas.ps1 vil håndtere OWA og ECP opdateringerne. Filen, som ligger under “C:\Program Files\Microsoft\Exchange Server\V14\Bin” skal afvikles på din Exchange 2010 server.

Kør “updatecas.ps1” i Exchange Management Shell.
Updatecas scriptet følger med opdateringspakkerne (update rollup)

Giv os et like, hvis du fandt løsningen brugbar.


The fastest option is to create a Shut Down shortcut and place it on your Desktop taskbar and Metro Start screen. Right click your Desktop, click New > Shortcut, and then type in: shutdown /s /t 0. (Don’t include the period. That’s a zero, not the letter O.) You can then right click the new shortcut and Pin to Start — and then you can drag it onto your taskbar. Clicking the shortcut will shut down your PC immediately.

Or even better get the Pokki software:

Man kan måske undre sig over at Microsoft ikke fra starten har implementeret disse funktioner i regulære knapper, men derimod via skjult genvej i et hjørne, med dertil hørende mange klik med musen.

Det kan der ændres på, og du kan se det vist i denne video

Create a Shutdown Shortcut

Navigate to the desktop
Right-click the desktop and choose New→Shortcut
In the “Type the location of the item” box, type: shutdown /s /t 0
Click Next
Enter the name “Shutdown” and click Finish

Create a Restart Shortcut

Navigate to the desktop
Right-click the desktop and choose New→Shortcut
In the “Type the location of the item” box, type: shutdown /r /t 0

Migration from SBS2003 to EX2K3:

Migration SBS2003 to EX2K10 (Windows Server 2008):